| General information |
| Product type designation |
CPU 416-5H PN/DP |
| Hardware product version |
1 |
| Firmware version |
V6.0 |
| Engineering with |
| ● Programming package |
As of STEP 7 V5.5 SP2 with HF1 |
| CiR – Configuration in RUN |
| CiR synchronization time, basic load |
100 ms |
| CiR synchronization time, time per I/O byte |
0 µs |
| Supply voltage |
| Rated value (DC) |
|
| ● 24 V DC |
No; Power supply via system power supply |
| Input current |
| from backplane bus 5 V DC, typ. |
1.6 A |
| from backplane bus 5 V DC, max. |
1.9 A |
| from backplane bus 24 V DC, max. |
150 mA; 150 mA per DP interface |
| from interface 5 V DC, max. |
90 mA; At each DP interface |
| Power loss |
| Power loss, typ. |
7.5 W |
| Memory |
| Type of memory |
other |
| Work memory |
| ● integrated |
16 Mbyte |
| ● integrated (for program) |
6 Mbyte |
| ● integrated (for data) |
10 Mbyte |
| ● expandable |
No |
| Load memory |
| ● expandable FEPROM |
Yes; with Memory Card (FLASH) |
| ● expandable FEPROM, max. |
64 Mbyte |
| ● integrated RAM, max. |
1 Mbyte |
| ● expandable RAM |
Yes |
| ● expandable RAM, max. |
64 Mbyte |
| Backup |
| ● present |
Yes |
| ● with battery |
Yes; all data |
| ● without battery |
No |
| Battery |
| Backup battery |
| ● Backup current, typ. |
180 µA; Valid up to 40°C |
| ● Backup current, max. |
1 000 µA |
| ● Backup time, max. |
Dealt with in the module data manual with the secondary conditions and the factors of influence |
| ● Feeding of external backup voltage to CPU |
5 V DC to 15 V DC |
| CPU processing times |
| for bit operations, typ. |
12.5 ns |
| for word operations, typ. |
12.5 ns |
| for fixed point arithmetic, typ. |
12.5 ns |
| for floating point arithmetic, typ. |
25 ns |
| CPU-blocks |
| DB |
| ● Number, max. |
16 000; Number range: 1 to 16000 |
| ● Size, max. |
64 kbyte |
| FB |
| ● Number, max. |
8 000; Number range: 0 to 7999 |
| ● Size, max. |
64 kbyte |
| FC |
| ● Number, max. |
8 000; Number range: 0 to 7999 |
| ● Size, max. |
64 kbyte |
| OB |
| ● Number, max. |
see instruction list |
| ● Size, max. |
64 kbyte |
| ● Number of free cycle OBs |
1; OB 1 |
| ● Number of time alarm OBs |
8; OB 10-17 |
| ● Number of delay alarm OBs |
4; OB 20-23 |
| ● Number of cyclic interrupt OBs |
9; OB 30-38 |
| ● Number of process alarm OBs |
8; OB 40-47 |
| ● Number of DPV1 alarm OBs |
3; OB 55-57 |
| ● Number of startup OBs |
2; OB 100, 102 |
| ● Number of asynchronous error OBs |
9; OB 80-88 |
| ● Number of synchronous error OBs |
2; OB 121, 122 |
| Nesting depth |
| ● per priority class |
24 |
| ● additional within an error OB |
2 |
| Counters, timers and their retentivity |
| S7 counter |
| ● Number |
2 048 |
| Retentivity |
| — adjustable |
Yes |
| — lower limit |
0 |
| — upper limit |
2 047 |
| — preset |
Z 0 to Z 7 |
| Counting range |
| — lower limit |
0 |
| — upper limit |
999 |
| IEC counter |
| ● Number |
Unlimited (limited only by RAM capacity) |
| S7 times |
| ● Number |
2 048 |
| Retentivity |
| — adjustable |
Yes |
| — lower limit |
0 |
| — upper limit |
2 047 |
| — preset |
No times retentive |
| Time range |
| — lower limit |
10 ms |
| — upper limit |
9 990 s |
| IEC timer |
| ● present |
Yes |
| ● Type |
SFB |
| ● Number |
Unlimited (limited only by RAM capacity) |
| Data areas and their retentivity |
| retentive data area in total |
Total working and load memory (with backup battery) |
| Flag |
| ● Number, max. |
16 384 byte |
| ● Retentivity available |
Yes |
| ● Retentivity preset |
MB 0 to MB 15 |
| ● Number of clock memories |
8; in 1 memory byte |
| Data blocks |
| ● Number, max. |
16 000; Number range: 1 to 16000 |
| ● Size, max. |
64 kbyte |
| Local data |
| ● adjustable, max. |
64 kbyte |
| ● preset |
32 kbyte |
| Address area |
| I/O address area |
| ● Inputs |
16 kbyte |
| ● Outputs |
16 kbyte |
| of which distributed |
| — MPI/DP interface, inputs |
2 kbyte |
| — MPI/DP interface, outputs |
2 kbyte |
| — DP interface, inputs |
8 kbyte |
| — DP interface, outputs |
8 kbyte |
| — PROFINET interface, inputs |
8 kbyte |
| — PROFINET interface, outputs |
8 kbyte |
| Process image |
| ● Inputs, adjustable |
16 kbyte |
| ● Outputs, adjustable |
16 kbyte |
| ● Inputs, default |
1 024 byte |
| ● Outputs, default |
1 024 byte |
| ● consistent data, max. |
244 byte |
| ● Access to consistent data in process image |
Yes |
| Subprocess images |
| ● Number of subprocess images, max. |
15 |
| Digital channels |
| ● Inputs |
131 072 |
| — of which central |
131 072 |
| ● Outputs |
131 072 |
| — of which central |
131 072 |
| Analog channels |
| ● Inputs |
8 192 |
| — of which central |
8 192 |
| ● Outputs |
8 192 |
| — of which central |
8 192 |
| Hardware configuration |
| Number of expansion units, max. |
21 |
| connectable OPs |
95 |
| Multicomputing |
No |
| Interface modules |
| ● Number of connectable IMs (total), max. |
6 |
| ● Number of connectable IM 460s, max. |
6 |
| ● Number of connectable IM 463s, max. |
4; Single mode only |
| Number of DP masters |
| ● integrated |
2 |
| ● via CP |
10; CP 443-5 Extended |
| ● Mixed mode IM + CP permitted |
No |
| ● via interface module |
0 |
| Number of IO Controllers |
| ● integrated |
1 |
| ● via CP |
0 |
| Number of operable FMs and CPs (recommended) |
| ● FM |
See manual Automation System S7-400H fault-tolerant systems. Limited by number of slots and number of connections |
| ● CP, PtP |
See manual Automation System S7-400H fault-tolerant systems. Limited by number of slots and number of connections |
| ● PROFIBUS and Ethernet CPs |
14; Of which max. 10 CP as DP master |
| Slots |
| ● required slots |
2 |
| Time of day |
| Clock |
| ● Hardware clock (real-time) |
Yes |
| ● retentive and synchronizable |
Yes |
| ● Resolution |
1 ms |
| ● Deviation per day (buffered), max. |
1.7 s; Power off |
| ● Deviation per day (unbuffered), max. |
8.6 s; Power on |
| Operating hours counter |
| ● Number |
16 |
| ● Number/Number range |
0 to 15 |
| ● Range of values |
SFCs 2, 3 and 4: 0 to 32767 hours SFC 101: 0 to 2^31 – 1 hours |
| ● Granularity |
1 hour |
| ● retentive |
Yes |
| Clock synchronization |
| ● supported |
Yes |
| ● to MPI, master |
Yes |
| ● to MPI, slave |
Yes |
| ● to DP, master |
Yes |
| ● to DP, slave |
Yes |
| ● in AS, master |
Yes |
| ● in AS, slave |
Yes |
| ● on Ethernet via NTP |
Yes; As client |
| Time difference in system when synchronizing via |
| ● Ethernet, max. |
10 ms; Via NTP |
| ● MPI, max. |
200 ms |
| Interfaces |
| Number of RS 485 interfaces |
2 |
| Number of other interfaces |
2; Fiber-optic interface |
| 1. Interface |
| Interface type |
Integrated |
| Physics |
RS 485 / PROFIBUS + MPI |
| Isolated |
Yes |
| Power supply to interface (15 to 30 V DC), max. |
150 mA |
| Number of connection resources |
MPI: 44, DP: 32 |
| Functionality |
| ● MPI |
Yes |
| ● PROFIBUS DP master |
Yes |
| ● PROFIBUS DP slave |
No |
| MPI |
| ● Number of connections |
44; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1 |
| ● Transmission rate, max. |
12 Mbit/s |
| Services |
| — PG/OP communication |
Yes |
| — Routing |
Yes |
| — Global data communication |
No |
| — S7 basic communication |
No |
| — S7 communication |
Yes |
| — S7 communication, as client |
Yes |
| — S7 communication, as server |
Yes |
| DP master |
| ● Number of connections, max. |
32; If a diagnostics repeater is used on the line, the number of connection resources on the line is reduced by 1 |
| ● Transmission rate, max. |
12 Mbit/s |
| ● Number of DP slaves, max. |
32 |
| Services |
| — PG/OP communication |
Yes |
| — Routing |
Yes |
| — Global data communication |
No |
| — S7 basic communication |
No |
| — S7 communication |
Yes |
| — S7 communication, as client |
Yes |
| — S7 communication, as server |
Yes |
| — Equidistance |
No |
| — Isochronous mode |
No |
| — SYNC/FREEZE |
No |
| — Activation/deactivation of DP slaves |
No |
| — Direct data exchange (slave-to-slave communication) |
No |
| — DPV1 |
Yes |
| Address area |
| — Inputs, max. |
2 kbyte |
| — Outputs, max. |
2 kbyte |
| User data per DP slave |
| — User data per DP slave, max. |
244 byte |
| — Inputs, max. |
244 byte |
| — Outputs, max. |
244 byte |
| — Slots, max. |
244 |
| — per slot, max. |
128 byte |
| DP slave |
| ● Number of connections |
No configuration of CPU as DP slave |
| 2. Interface |
| Interface type |
PROFINET |
| Physics |
Ethernet RJ45 |
| Isolated |
Yes |
| automatic detection of transmission rate |
Yes; Autosensing |
| Autonegotiation |
Yes |
| Autocrossing |
Yes |
| Change of IP address at runtime, supported |
No |
| Number of connection resources |
96 |
| Interface types |
| ● Number of ports |
2 |
| ● integrated switch |
Yes |
| Media redundancy |
| ● supported |
Yes |
| ● Switchover time on line break, typ. |
200 ms |
| ● Number of stations in the ring, max. |
50 |
| Functionality |
| ● PROFINET IO Controller |
Yes |
| ● PROFINET IO Device |
No |
| ● PROFINET CBA |
No |
| ● PROFIBUS DP master |
No |
| ● PROFIBUS DP slave |
No |
| ● Open IE communication |
Yes |
| ● Web server |
No |
| ● Point-to-point connection |
No |
| PROFINET IO Controller |
| ● Transmission rate, max. |
100 Mbit/s |
| Services |
| — PG/OP communication |
Yes |
| — S7 routing |
Yes |
| — S7 communication |
Yes |
| — Isochronous mode |
No |
| — Open IE communication |
Yes |
| — Shared device |
Yes; Single mode only |
| — Prioritized startup |
No |
| — Number of connectable IO Devices, max. |
256; In redundant mode via both interfaces |
| — Number of connectable IO Devices for RT, max. |
256 |
| — of which in line, max. |
256 |
| — Activation/deactivation of IO Devices |
No |
| — IO Devices changing during operation (partner ports), supported |
No |
| — Device replacement without swap medium |
Yes |
| — Send cycles |
250 µs, 500 µs, 1 ms, 2 ms, 4 ms |
| — Updating time |
250 µs to 512 ms, minimum value depends on the number of configured user data and the configured single or redundant mode |
| Address area |
| — Inputs, max. |
8 kbyte |
| — Outputs, max. |
8 kbyte |
| — User data consistency, max. |
1 024 byte |
| Open IE communication |
| ● Number of connections, max. |
94 |
| ● Local port numbers used at the system end |
0, 20, 21, 25, 102, 135, 161, 34962, 34963, 34964, 65532, 65533, 65534, 65535 |
| ● Keep-alive function, supported |
Yes |
| 3. Interface |
| Interface type |
Integrated |
| Physics |
RS 485 / PROFIBUS |
| Power supply to interface (15 to 30 V DC), max. |
150 mA |
| Number of connection resources |
32 |
| Functionality |
| ● PROFIBUS DP master |
Yes |
| ● PROFIBUS DP slave |
No |
| DP master |
| Services |
| — PG/OP communication |
Yes |
| — Routing |
Yes |
| — Global data communication |
No |
| — S7 basic communication |
No |
| — S7 communication |
Yes |
| — S7 communication, as client |
Yes |
| — S7 communication, as server |
Yes |
| — Equidistance |
No |
| — Isochronous mode |
No |
| — SYNC/FREEZE |
No |
| — Activation/deactivation of DP slaves |
No |
| — Direct data exchange (slave-to-slave communication) |
No |
| — DPV0 |
Yes |
| — DPV1 |
Yes |
| Address area |
| — Inputs, max. |
8 kbyte |
| — Outputs, max. |
8 kbyte |
| User data per DP slave |
| — User data per DP slave, max. |
244 byte |
| — Inputs, max. |
244 byte |
| — Outputs, max. |
244 byte |
| — Slots, max. |
244 |
| — per slot, max. |
128 byte |
| 4. Interface |
| Interface type |
Pluggable synchronization submodule (FO) |
| Plug-in interface modules |
Synchronization modules 6ES7960-1AA06-0XA0 or 6ES7960-1AB06-0XA0 |
| 5. Interface |
| Interface type |
Pluggable synchronization submodule (FO) |
| Plug-in interface modules |
Synchronization modules 6ES7960-1AA06-0XA0 or 6ES7960-1AB06-0XA0 |
| Protocols |
| Open IE communication |
| ● TCP/IP |
|
| — Number of connections, max. |
94 |
| — Data length, max. |
32 kbyte |
| — several passive connections per port, supported |
Yes |
| ● ISO-on-TCP (RFC1006) |
Yes; Via integrated PROFINET interface or CP 443-1 and loadable FBs |
| — Number of connections, max. |
94 |
| — Data length, max. |
32 kbyte; 1452 bytes via CP 443-1 Adv. |
| ● UDP |
|
| — Number of connections, max. |
94 |
| — Data length, max. |
1 472 byte |
| Isochronous mode |
| Isochronous operation (application synchronized up to terminal) |
No |
| Equidistance |
No |
| Communication functions |
| PG/OP communication |
Yes |
| ● Number of connectable OPs without message processing |
95 |
| ● Number of connectable OPs with message processing |
95; When using Alarm_S/SQ and Alarm_D/DQ |
| Data record routing |
Yes |
| S7 routing |
Yes |
| Global data communication |
| ● supported |
No |
| S7 basic communication |
| ● supported |
No |
| S7 communication |
| ● supported |
Yes |
| ● as server |
Yes |
| ● as client |
Yes |
| ● User data per job, max. |
64 kbyte |
| ● User data per job (of which consistent), max. |
462 byte; 1 variable |
| S5 compatible communication |
| ● supported |
Yes; (via CP max. 10 and FC AG_SEND and FC AG_RECV) |
| ● User data per job, max. |
8 kbyte |
| ● User data per job (of which consistent), max. |
240 byte |
| ● Number of simultaneous AG-SEND/AG-RECV orders per CPU, max. |
64/64 |
| Standard communication (FMS) |
| ● supported |
Yes; Via CP and loadable FB |
| Open IE communication |
| ● TCP/IP |
Yes; via integrated PROFINET interface and loadable FBs |
| ● UDP |
Yes; via integrated PROFINET interface and loadable FBs |
| Web server |
| ● supported |
No |
| Number of connections |
| ● overall |
96 |
| ● usable for PG communication |
|
| — reserved for PG communication |
1 |
| — adjustable for PG communication, max. |
0 |
| ● usable for OP communication |
|
| — reserved for OP communication |
1 |
| — adjustable for OP communication, max. |
0 |
| ● usable for S7 basic communication |
|
| — reserved for S7 basic communication |
0 |
| — adjustable for S7 basic communication, max. |
0 |
| ● usable for S7 communication |
|
| — reserved for S7 communication |
0 |
| — adjustable for S7 communication, max. |
0 |
| ● usable for routing |
|
| — reserved for routing |
0 |
| — adjustable for routing, max. |
0 |
| S7 message functions |
| Number of login stations for message functions, max. |
95; Max. 95 with Alarm_S/SQ and Alarm_D/DQ (OPs); max. 8 with Alarm, Alarm_8, Alarm_8P, Notify and Notify_8 (e.g. WinCC) |
| Symbol-related messages |
No |
| SCAN procedure |
No |
| Block related messages |
Yes |
| Process diagnostic messages |
Yes |
| simultaneously active Alarm-S blocks, max. |
1 000; Simultaneously active alarm_S/SQ blocks or alarm_D/DQ blocks |
| Alarm 8-blocks |
Yes |
| ● Number of instances for alarm 8 and S7 communication blocks, max. |
10 000 |
| ● preset, max. |
1 200 |
| Process control messages |
Yes |
| Number of archives that can log on simultaneously (SFB 37 AR_SEND) |
64 |
| Test commissioning functions |
| Status block |
Yes |
| Single step |
Yes |
| Number of breakpoints |
16 |
| Status/control |
| ● Status/control variable |
Yes; Up to 16 variable tables |
| ● Variables |
Inputs/outputs, memory bits, DBs, distributed I/Os, timers, counters |
| ● Number of variables, max. |
70 |
| Forcing |
| ● Forcing |
Yes |
| ● Forcing, variables |
Inputs/outputs, bit memories, distributed I/Os |
| ● Number of variables, max. |
512 |
| Diagnostic buffer |
| ● present |
Yes |
| ● Number of entries, max. |
3 200 |
| — adjustable |
Yes |
| — preset |
120 |
| Service data |
| ● can be read out |
Yes |
| EMC |
| Emission of radio interference acc. to EN 55 011 |
| ● Limit class A, for use in industrial areas |
Yes |
| ● Limit class B, for use in residential areas |
No |
| Configuration |
| Configuration software |
| ● STEP 7 |
Yes |
| Programming |
| ● Command set |
see instruction list |
| ● Nesting levels |
7 |
| ● Access to consistent data in process image |
Yes |
| ● System functions (SFC) |
see instruction list |
| ● System function blocks (SFB) |
see instruction list |
| Programming language |
| — LAD |
Yes |
| — FBD |
Yes |
| — STL |
Yes |
| — SCL |
Yes |
| — CFC |
Yes |
| — GRAPH |
Yes |
| — HiGraph® |
Yes |
| Number of simultaneously active SFCs |
| — RD_REC |
8 |
| — WR_REC |
8 |
| — WR_PARM |
8 |
| — PARM_MOD |
1 |
| — WR_DPARM |
2 |
| — DPNRM_DG |
8 |
| — RDSYSST |
8 |
| — DP_TOPOL |
1 |
| Number of simultaneously active SFBs |
| — RDREC |
8 |
| — WRREC |
8 |
| Know-how protection |
| ● User program protection/password protection |
Yes |
| ● Block encryption |
Yes; With S7 block Privacy |
| Dimensions |
| Width |
50 mm |
| Height |
290 mm |
| Depth |
219 mm |
| Weights |
| Weight, approx. |
995 g |
